Turnbull’s NBN Legacy of Failure

Malcolm Turnbull has left Australia with quite a legacy with the National Broadband Network (NBN).

Back when the NBN was first mooted in 2008 – (though one could argue its origins go back the OPEL Networks plan from 2006) – everyone was supposed to be on one of three different technologies – 93% of the population with Fibre-to-the-Premise (FTTP, with up to 100Mbps), 4% with Fixed Wireless (FW, with up to 25Mbps), and 3% Satellite Broadband (SB, with up to 12Mbps).

Tmthetom [CC BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0)]

When then Communications Minister Stephen Conroy cancelled the OPEL plan in 2008, what has become known as the NBN was formulated, with the 93/4/3% split described above.

Enough capacity was to be put into the ground in the FTTP footprint to support 6 separate services – (4 data, and 2 voice) – in every single premise in those areas. The fibre going into the ground was to support services of up to 40Gbps.

To achieve those speeds – (over and above the standard 100Mbps offered initially) – all that would be required is an update to the electronics at each of the fibre connection.

Yes – the original 2008 NBN plan would have allowed for 40Gbps, dependent on CVC and backhaul capacity to be provided by individual ISPs.

Leading up to the 2013 election – and the change of government – then opposition communications spokesweasel, Malcolm Turnbull, and opposition leader Tony Abbott had other ideas.

Simply to oppose on politically ideological grounds, they decided that Conroy’s plan was “too expensive”, and would take “too long”.

Their alternative was to be “cheaper” and “faster to deliver” – neither which has been proven, and has in fact been widely debunked. Their plan called for all areas in which FTTP had not already been deployed, to change to Fibre-to-the-Node (FTTN, with up to 100Mbps), using existing copper.

The status of the existing copper was questionable at best.

The rollout has proven to be no faster to deliver – (and in fact has taken longer) – and sustainable speeds of 100Mbps have been so difficult to reach that most ISPs no longer even offer 100Mbps plans – including on the parts of the network that are deployed with FTTP.

What we in fact end up with is what Turnbull called the “Multi Technology Mix” (MTM) – which would leave Australia covered with FTTP in areas where it had already been rolled out, Hybrid Fibre Coaxial (HFC) cable in areas where HFC was already rolled out, FTTN in the remaining areas where FTTP had not already been committed and there wasn’t already HFC, and finally FW and SB in much the same areas as originally planned.

The FTTN areas were later broken up further to include some Fibre-to-the-Curb (FTTC) deployments when they realised FTTN, in particular, wasn’t cutting it. Many areas which they earmarked for existing HFC later switched back to FTTN or FTTC, because many of the existing HFC networks they purchased couldn’t be made suitable.

And 100Mbps? Not even remotely likely unless you’re in an FTTP area, and with an ISP that has purchased enough CVC and backhaul capacity.

Rare.

So what does the MTM end up looking like? Take a look at this small area in the western part of Geelong, Victoria, with mapping provided by NBN MTM Alpha:

The purple dots represent locations that are serviced by FTTP; the yellow dots locations that are serviced by FTTN; the green dots locations that are serviced by FTTC; the pink dots locations that are serviced by FW; the orange dots locations serviced by SB; and finally the blue dots locations that are serviced by fibre from a non-NBN provider.

This is pretty stunning – and stunningly stupid.

You’ll see in the bottom right a patch of FTTC – (green) – where some premises right next door to green dots are getting FTTN – (yellow).

In the same street.

In the middle of the map, you’ll see the hamlet of Fyansford – where at the southern end of town you have a non-NBN fibre provider – (blue) – and at the northern end of town you have FTTP – (purple) – with a blob of FIXED WIRELESS in between. This band of fixed wireless is about 10 house blocks wide – or around 120 metres.

Apparently nobody thought that this area – (which is the newest part of that residential estate) – right next door to two fibre areas should get any kind of fixed-line service – not even FTTN or FTTC.

Stupidity.

Finally, zooming into the area just to the right of Fyansford – (which is on the side of a hill) – we see this:

Locations on the eastern side of Hunt Road get FTTN – (yellow) – locations on the western side get SATELLITE – (orange) – and just a little way down the hill, locations get Fixed Wireless – (pink).

And just to the north? A purple dot of FTTP.

I mean, what the hell?

Australia will one day rue this shemozzle of a “multi-technology mess”.

Trouble is, that day has already come, and Turnbull should hang his head in shame.

Is it Huawei or the Highway?

There’s been a lot of discussion lately around whether allowing Huawei telecommunications equipment into major infrastructure is a good idea or not.

Given the company has strong and proven ties to the Chinese military, I don’t think it is even unreasonable to have an honest discussion about the security implications of using their equipment.

https://upload.wikimedia.org/wikipedia/commons/thumb/1/11/HuaweiCanada9.jpg/1280px-HuaweiCanada9.jpg

However, if we’re going to have such a discussion about their equipment, we should have the entire discussion.

An excellent example is the common HG659 modem/router, in use all over the world, including extensively in Australian premises as part of the National Broadband Network (NBN) rollout.

The HG659 is an extremely popular modem with ISPs, because it is an extremely versatile modem.  It supports both ADSL and VDSL connections, and FTTP connections.  For this reason it is widely deployed in Australia as part of the “multi-technology mix” hodge-podge Malcolm Turnbull turned the NBN into for political reasons, rather than for technology reasons.

Australian ISPs using the HG659 therefore only have to stock one type of modem, and you as the end user just plug it into whatever NBN technology is serving your premises, and the modem self-configures to suit.

Done!

A great number of Australian ISPs use it – (and brand it with their own logos) – see a selection below:

ISPs in other countries also use it:

The use of the HG659 modem is widespread worldwide – including in jurisdictions where the lawmakers are seeking to ban the use of Huawei equipment in telecommunications systems, such as Australia and the United States.

I’ve even read of instances where one Australian ISP appears to have an active backdoor into their private customer’s networks, using the custom firmware in their supplied HG659 modems.

But why ban Huawei in the implementation of 5G networks, but happily welcome them into other significant network infrastructure?

One might argue that having a footprint inside millions of homes is a bigger concern than having them in mobile phone towers – (which can be and are actively monitored by the carriers operating them, and suspicious activity might be detected) – as the vast majority of home users get the modem from their ISP, plug it into the wall and never think about it again.

Monitoring?  Yeah, right.

I think the politicians are clearly – (as is often the case) – trying to make a political point without having any real understanding of what they are talking about.

Huawei may or may not present information or national security issues, but if you’re going to take a stand against them, you cannot and should not be so selective.

Ban them or don’t ban them – but just don’t half-ass your decision.

Further Reading: